Slark Race Engineering – Bristol Rolling Road Tuning

Slark Modified Cylinder Heads

 

The cylinder heads in the SOR and SR ranges use valves, springs and bronze guides all developed and manufactured to our own design.

Cylinder Head Option Pricing
SDOR
The ultimate five port race cylinder head. 38.8mm, 37.5mm or 36mm inlet x 32mm, 31mm or 29mm exhaust valves. The exhaust valve is offset to accommodate the large valves with the effect that the exhaust port is straighter. The inlet ports are sleeved and repositioned for maximum flow. The inlet ports have sleeved pushrod holes
Please contact for pricing
SOR3
Race or sprint head using 214N stainless 37.5mm inlet valve x 31mm offset exhaust valves. Bullet nosed valve guides, titanium caps, double valve springs, Designed for high rpm/power
Please contact for pricing
SOR2
Race or sprint cylinder head using 214N stainless valves 36mm x 31mm exhaust valves are offset for a straighter exhaust flow and to give a wider area between inlet and exhaust valves, bullet nosed guides and titanium caps. Double valve springs. Use where maximum power and long term reliability are required in the most punishing circumstances
Please contact for pricing
STOR
For Turbo applications. Exhaust valve is offset giving straighter ports. Using 32mm exhaust and 36mm inlet valves. The chambers can be increased up to 30cc for lower compression. 214N valves, double valve springs and bullet guides used throughout
Please contact for pricing
SRM
Mini Miglia race spec head 36mmX31mm. Valves and springs our own design
Please contact for pricing
SRM7
Mini 7 1000cc race spec head 36X31. Valves and springs our own design
Please contact for pricing
SR3
Based on the 12g940 casting Used extensively in 1000cc Sprite, Midget and Autograss racing. Fully ported and gas flowed and fitted with bullet nosed valve guides. Double valve springs, steel caps. Inlet pushrod holes are sleeved. Valves 214n size 35.7mm x 31mm
Please contact for pricing
SR2
For use primarily in rally situations using twin S.U carbs. Valves 214n sizes 35.7mm x 31mm inlet pushrod holes are sleeved
Please contact for pricing
SF4
A ‘fast road’ head, ported and gas flowed and fitted with 214n stainless valves 35.7mm x 31 mm exhausts for over-bored engines
Please contact for pricing
SF3
A ‘fast road’ head, ported and gas flowed and fitted with hardened valve seats to enable the use of unleaded fuel. Valve sizes 35.7mm x 29mm. Double valve springs and steel caps
Please contact for pricing
SF2
A ‘fast road’ head, ported and gas flowed and fitted with 35.7mm x 29mm valves Double valve springs and steel caps. Not unleaded unless an unleaded casting is supplied
Please contact for pricing
SF1
A ‘fast road’ head, ported and gas flowed using 33mm x 29mm valves. Gives a smooth and economical performance and can be used with unleaded fuel
Please contact for pricing
SFU
Std 1275 or 998 fully reconditioned cylinder head; painted, fitted with hardened unleaded inserts and new components throughout
Please contact for pricing

Please note all prices are based on a good serviceable exchange casting supplied to us either before or after the head is completed. A surcharge of £100 +VAT will apply if casting is not supplied.

**NEW CAMSHAFT RANGE IN STOCK**

We are now stocking a range of camshafts, which have been developed with AC Dodd and are now used in our engines.

Please contact us for pricing and more information.